Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Purpose of the DTC
- To monitor the active engine mounts circuit
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control Module Cavity
- Circuit reference O_T_EMC1
- Monitor Description
- Short circuit to ground on active engine mount circuit
- The powertrain control module has detected a ground measurement for a period longer than expected or has detected a ground measurement when another value was expected
- Engine mount - Active, - left/right circuit short circuit to ground, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Engine mount - Active, - left/right failure