Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Purpose of the DTC
- To monitor the active engine mounts circuit
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control Module Cavity
- Circuit reference O_T_EMC1
- Monitor Description
- Open load on active engine mount circuit
- The powertrain control module has determined an open circuit via lack of bias voltage, low current flow, no change in the state of an input in response to an output
- Engine mount - Active, - left/right circuit short circuit to ground, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Engine mount - Active, - left/right failure