DTC P0219-95: Engine Overspeed Condition - Incorrect assembly: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Check and correct engine oil level
- Check air induction system for excessive oil
- Check crankshaft position sensor is correctly installed
- Refer to appropriate system wiring diagram and check the crankshaft position sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Check crankshaft position sensor target rotor for damage
- Using the Jaguar Land Rover approved diagnostic equipment, check transmission control module for DTCs and refer to the relevant DTC index
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest