DTC P0110-62: Intake Air Temperature Sensor 1 Circuit Bank 1 - Signal compare failure: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagram and check the intake air temperature sensor - combined with MAF sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Refer to the appropriate system wiring diagram and check the charge air cooler temperature sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Refer to the appropriate system wiring diagram and check the ambient air temperature sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Check and install a new intake air temperature sensor - combined with MAF sensor as required
- Check and install a new charge air cooler temperature sensor as required
- Check and install a new ambient air temperature sensor as required
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest