LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission/Transaxle - (8HP45) -- Range Rover/L405) >> Automatic Transmission / Transaxle - Vehicles With: 8HP45 8-Speed Automatic Transmission AWD >> Transmission Control Module And Main Control Valve Body >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, and 2015 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Be prepared to collect escaping fluids.
CAUTION: Make sure all suitable safety precautions are taken to protect the TCM and main control valve body electrical connector pins against electrostatic discharge.
NOTE:
  • The transmission control module (TCM) is part of the main control valve body and cannot be serviced separately.
  • Some variation in the illustrations may occur, but the essential information is always correct.

All vehicles 

  1. Remove the transmission fluid pan.

    Refer to: TRANSMISSION FLUID PAN, GASKET AND FILTER .

    Vehicles with Stop/Start 

  2. CAUTION: Take precautions to avoid any electrostatic charging, which could damage this component.
    G11599721
  3. G11599722
  4. G11599723

    All vehicles 

  5. CAUTION: Take precautions to avoid any electrostatic charging, which could damage this component.
    G11599724
  6. G11599725
  7. G11700110
  8. NOTE: Note the orientation of the component prior to removal.
    G11599727
  9. G11599728
  10. G11599729

    Special Tool(s): JLR-308-844 

  11. G11599730
  12. CAUTION: Discard the bolts.
    G11599731

    Torque Specification: 8 Nm 

    NOTE: Note the position of the manual park brake release.
  13. G11599732