LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission/Transaxle - (8HP45) -- Range Rover/L405) >> Automatic Transmission / Transaxle - Vehicles With: 8HP45 8-Speed Automatic Transmission AWD >> Input Shaft Seal >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, and 2015 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Install a new seal.
    G11599702

    Special Tool(s): JLR-308-845 

    Renew Part: Torque converter seal kit  Quantity: 1  .

  2. CAUTION: Make sure the torque converter is fully located into the oil pump drive.
    G11607374
  3. Install the transmission and transfer gearbox.

    Refer to: TRANSMISSION .

  4. Refer to: TRANSMISSION FLUID LEVEL CHECK .

scientia non olet · About LEMON Manuals