LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Fuel Tank & Lines - TDV6 3.0L Diesel -- Range Rover/L405) >> Fuel Tank And Lines - TDV6 3.0L Diesel >> Fuel Level Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: After carrying out repairs, the fuel system must be checked visually for leaks. Failure to follow this instruction may result in personal injury.
CAUTION: Make sure the workshop area in which the vehicle is being worked on is as clean and as dust free as possible. Foreign matter from work on clutches, brakes or from machining or welding operations can contaminate the fuel system and may result in later malfunction.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: DIESEL FUEL SYSTEM HEALTH AND SAFETY PRECAUTIONS
  3. Disconnect the battery ground cable.

    Refer to: SPECIFICATIONS

  4. G11708420

    Torque Specification: 7 Nm 

scientia non olet · About LEMON Manuals