TDV6 3.0L Diesel Engine - Vacuum System Layout. Twin Turbo Variants Only
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
| ITEM | DESCRIPTION |
|---|---|
| 1 | High pressure EGR(s) (1 or 2 may be fitted) |
| 2 | EGR Cooler bypass valve solenoid |
| 3 | Active engine mounts (x2) (where fitted) |
| 4 | Active engine mount solenoid (where fitted) |
| 5 | Turbine intake shut-off valve |
| 6 | Turbine intake shut-off valve solenoid |
| 7 | Charge air shut-off valve |
| 8 | Charge air shut-off valve solenoid |
| 9 | Air filter housing |
| 10 | Vacuum reservoir |
| 11 | Non return valve |
| 12 | Vacuum pump |
| 13 | Non return valve |
| 14 | Brake servo |
| A | Vacuum supply hose |
| B | Vacuum vent hose |
| C | Actuator vacuum supply and vent hose |
| D | Direction of flow |
| TP | Pin point test reference - Test Point |