Fuel Charging And Controls - TDV6 3.0L Diesel: Specifications
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
A = refer to procedure for the correct torque sequence.
TORQUE SPECIFICATION
| DESCRIPTION | NM | LB-FT | LB-IN |
|---|---|---|---|
| Fuel injection pump cradle bolts | 3 | - | 26 |
| Fuel injection pump retaining bolts | 23 | 16 | - |
| Fuel injection pump bracket | 10 | - | 88 |
| Fuel injection pump sprocket bolt | 50 | 37 | - |
| Fuel injection pump belt rear cover retaining bolts | 10 | - | 88 |
| Camshaft rear end accessory drive (READ) pulley hub retaining bolt | A** | - | - |
| Fuel injection pump belt tensioner retaining bolt | 23 | 16 | - |
| Camshaft READ pulley retaining bolt | A** | - | - |
| Fuel injector retaining bolts | 9 | - | 80 |
| Fuel rail retaining | bolts | 24 | 18 |
| High-pressure fuel line bracket retaining bolts | 10 | - | 88 |
| High-pressure fuel line union nuts | A** | - | - |
| Fuel rail supply tube union nuts | A** | - | - |
| Fuel crossover line union nuts | A** | - | - |
| Crankcase ventilation pipe retain bolts | 10 | - | 88 |
| Intake air shutoff valve retaining nut | 10 | - | 88 |