General Procedures
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
| 19.50.22 | FUEL INJECTION COMPONENT CLEANING USING A VACUUM GUN | 3000 CC, TDV6 | 0.1 |
WARNING:
Do not carry out any repairs to the fuel system with the engine running. The fuel pressure within the system can be as high as 1700 bar (24, 656 lb-sq-in). Failure to follow this instruction may result in personal injury.
CAUTION:
Before using the cleaning fluid, protect all electrical components and connectors with lint-free non-flocking material.
NOTE:
Pneumatic vacuum gun
- Using a new brush that will not lose its bristles, brush cleaning fluid onto the components being removed and onto the surrounding area.
- Using a pneumatic vacuum gun, remove all traces of cleaning fluid and foreign material.
- Dispose of any used cleaning fluid and the brush after completing the repair.