Description And Operation: Overview

The Electric Park Brake (EPB) is an electrically actuated system that operates the calipers on the rear brakes. The system consists of:

• An EPB switch
• Two EPB actuators
• An Anti-lock Brake System (ABS) control module
• Two warning indicators.

The EPB is controlled by the ABS control module, which uses the EPB actuators to apply and release the rear disc brakes. Operation of the EPB is initiated by the EPB switch and software within the ABS control module. The EPB has the following operating modes:

• Static apply/release
• Drive-away release
• Automatic transmission apply/release
• Ignition off apply
• High temperature re-clamp
• Driver exit warning
• Dynamic apply.

Signals from other vehicle systems for operation of the EPB are transmitted to the ABS control module on the High Speed (HS) Controller Area Network (CAN) chassis bus or the Flexray circuit.