LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> Range Rover Autobiography >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation -- Range Rover/L405 >> Power Brake Actuation >> Brake Vacuum Pump - TDV6 3.0L Diesel >> Removal And Installation >> Removal

Removal And Installation: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: SECONDARY BULKHEAD CENTRE PANEL - TDV6 3.0L DIESEL .
  3. G11693926
  4. G11693927

    Torque Specification: 6 Nm 

  5. G11693928
  6. G11693929
  7. G11693930
    NOTE: Remove and discard the O-ring seal.
  8. G11693931

    Renew Part: Brake vacuum pump O-ring seal Quantity: 1  .

    Torque Specification: 10 Nm 

  9. G11693932

    Torque Specification: 23 Nm 

  10. G11693933

    Torque Specification: 13 Nm 

  11. G11693934

    Torque Specification: 23 Nm 

  12. G11597346