LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> LR4 Base, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- LR4/L319 >> Hydraulic Brake Actuation >> Brake Fluid Reservoir >> Removal And Installation >> Removal

Removal And Installation: Removal

CAUTION: Brake fluid will damage paint finished surfaces. If spilled, immediately remove the fluid and clean the area with water.

All vehicles 

  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. G11597303

    Remove the cover.

  3. Position an absorbent cloth to collect fluid spillage.
  4. Disconnect the low brake fluid warning indicator switch electrical connector.

    Vehicles with manual transmission 

  5. CAUTION: Always plug any open connections to prevent contamination.

    Disconnect the clutch master cylinder supply line.

    All vehicles 

  6. CAUTION: Always plug any open connections to prevent contamination.
    G11597304

    Remove the brake fluid reservoir.

    • Release the 2 clips.
    • Remove and discard 2 brake fluid reservoir seals.