LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> LR2 HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Fuel Charging & Controls - Turbocharger - INGENIUM I4 2.0L Petrol -- XF/X260) >> Fuel Charging And Controls - Turbocharger - INGENIUM I4 2.0L Petrol >> Turbocharger Oil Supply Tube >> Installation

Turbocharger Oil Supply Tube: Installation

WARNING: This page is about a different car, the 2018 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the turbocharger oil feed pipe.
    • Install new banjo bolt washers.

      Renew Part: Turbocharger oil feed pipe banjo bolt washers. Quantity: 4. 

    • Install new banjo bolts.

      Renew Part: Turbocharger oil feed pipe banjo bolt. Quantity: 2. 

      Torque Specification: 18 Nm 

  2. Install the accessory drive belt.

    Refer to: Accessory Drive Belt

scientia non olet · About LEMON Manuals