LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Transmission/Transaxle Cooling - INGENIUM I4 2.0L Petrol, Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XF/X260) >> Transmission/Transaxle Cooling - INGENIUM I4 2.0L Petrol, Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Transmission Fluid Cooler Tubes - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transmission cooler tubes.
  2. CAUTION: Install new O-ring seals.
    • Install new O-ring seals to the transmission cooler tubes.

      Renew Part: Transmission fluid cooler tubes to transmission O-ring seals  .

    • Install and tighten the bolt securing the transmission fluid cooler tubes to the transmission assembly.

      Torque Specification  : 22 Nm 

  3. Install and tighten the bolt securing the transmission fluid cooler tubes to the oil pan assembly.

    Torque Specification  : 11 Nm 

  4. Install the 2 transmission cooler tubes to the transmission cooler assembly.
    • Install the front left lower fender splash shield.
    • Install the 3 clips securing the lower fender splash shield to the vehicle body.
  6. Fill the transmission fluid.

    Refer to: Transmission Fluid Drain and Refill .

  7. Lower the vehicle.
scientia non olet · About LEMON Manuals