LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Transmission/Transaxle Cooling - INGENIUM I4 2.0L Petrol, Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XF/X260) >> Transmission/Transaxle Cooling - INGENIUM I4 2.0L Petrol, Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Transmission Fluid Cooler - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the transmission fluid cooler assembly.
    • Install the bolt and tighten, to secure the transmission cooler assembly to the bracket.

      Torque Specification  : 5 Nm 

  2. Install the 2 transmission cooler tubes to the transmission cooler assembly.
  3. Install the 2 coolant pipes to the transmission cooler assembly.
    • Install the front left lower fender splash shield.
    • Install the 3 clips securing the lower fender splash shield to the vehicle body.
  5. Fill the coolant system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .

  6. Fill the transmission fluid system.

    Refer to: Transmission Fluid Drain and Refill .

  7. Lower the vehicle.
scientia non olet · About LEMON Manuals