LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Fuel Tank & Lines - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XF/X250) >> Fuel Tank And Lines - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Removal And Installation >> Fuel Tank (G1086687) >> Removal

Fuel Tank (G1086687): Removal

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 Jaguar XFR-S, 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR-S, and 2014 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Petrol and Petrol-Ethanol Fuel Systems Health and Safety Precautions (General Information, Description and Operation).
  2. Refer to: Battery Disconnect and Connect (Battery, Mounting and Cables, General Procedures).
  3. Refer to: Fuel System Pressure Release - V6 S/C 3.0L Petrol/V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol (General Information, General Procedures).
  4. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

    Raise and support the vehicle.

  5. Refer to: Driveshaft - Gtdi 2.0L Petrol/V6 S/C 3.0 L Petrol/V8 S/C 5.0L Petrol (G1447993) (Removal and Installation).
  6. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
    G11424111

    Torque Specification: 10 Nm 

  7. G11424112

    Torque Specification: 4.8 Nm 

  8. WARNING: The spilling of fuel is unavoidable during this operation. Make sure that all necessary precautions are taken to prevent fire and explosion.
    G11424113
  9. NOTE: Non federal market vehicles only.
    G11424114
  10. NOTE: Federal market vehicles only.
    G11424115
  11. NOTE: On vehicles with supercharger, detach the lower electric connector from the retaining bracket as well as the electrical connector indicated.
    G11424116
  12. G11424117
  13. WARNING: Secure the component to the transmission jack.
    CAUTION: Use suitable packing material to prevent damage to the component.
    G11424118

    Torque Specification: 35 Nm 

  14. NOTE: Do not disassemble further if the component is removed for access only.
    G11424119
  15. G11424120
  16. G11424121