LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> LR2 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- LR2/L359 >> Hydraulic Brake Actuation >> Brake Fluid Reservoir - TD4 2.2L Diesel >> Removal And Installation >> Removal

Removal And Installation: Removal

CAUTION:
  • Extreme cleanliness must be exercised when handling these components.
  • If brake fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.
NOTE: Removal steps in this procedure may contain installation details.

All vehicles

  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

    Left-hand drive vehicles

  2. Remove the battery.

    Refer to: Battery .

    Right-hand drive vehicles

  3. Remove the plenum chamber panel.

    Refer to: Plenum Chamber .

    All vehicles

  4. CAUTION: Be prepared to collect escaping fluids.
    G11674903

    Torque Specification: 6 Nm 

    Vehicles with manual transmission

  5. CAUTION:
    • Be prepared to collect escaping fluids.
    • Make sure that all openings are sealed.
    G11674904

    All vehicles

  6. CAUTION: Make sure that all openings are sealed.
    G11674905