LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2013 >> Range Rover Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel & Console - Standard Wheel Base -- Range Rover/L405 >> Instrument Panel And Console - Standard Wheel Base >> Ignition Switch >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the ignition switch.
    • Install the ignition switch and trim panel.
    • Connect the electrical connector.

      Torque Specification: 1.5 Nm 

  3. Install the instrument cluster trim panel.
  4. Install the steering column upper trim panel.
  5. Install the instrumental upper trim panel.
  6. Connect the startup battery ground cable.

    Refer to: SPECIFICATIONS .

scientia non olet · About LEMON Manuals