Fuel Tank And Lines - V6 S/C 3.0L Petrol: Specifications
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
CAPACITY
| ITEM | LITERS |
|---|---|
| Fuel tank capacity | 86.3 (total) |
GENERAL SPECIFICATIONS
| ITEM | SPECIFICATIONS |
|---|---|
| Fuel system | Electronic - returnless |
| Fuel tank | Multi layer plastic |
| Fuel tank sender units | Two - Front and Rear - front sender unit is attached to the frame of the fuel pick up tube and the rear sender unit is attached to the fuel pump swirl pot |
| Fuel filter | Located in the fuel tank - if the fuel filter becomes blocked a new pump and sender unit must be installed |
| Fuel pump | Dual stage electric - submersible - located in fuel tank |
| System pressure | 4.5 bar - 65.3 lbf/in2 |
| Starting pressure | 6.3 bar - 91.4 lbf/in2 |
TORQUE SPECIFICATIONS
| ITEM | NM | LB-FT | LB-IN |
|---|---|---|---|
| Fuel tank filler pipe retaining bolt | 4 | - | 35 |
| Fuel tank heat shield retaining bolts | 6 | - | 53 |
| Fuel tank heat shield retaining nuts | 3 | - | 27 |
| Fuel tank retaining bolts | 45 | 33 | - |