Removal And Installation: Installation
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
Torque Specification: 6 Nm
Torque Specifications:
M6 10 Nm
M10 62 Nm
- Lower the vehicle.
Torque Specification: 3.5 Nm
- refer to: Left Air Cleaner
When coolant runs from the bleed point bubble-free, tighten the bleed screw.
- Check and top-up the coolant.
- Refer to: Specifications
-
CAUTION: Damage to the charge air coolant pump will occur if the pump is allowed to cavitate.NOTE: With the ignition key turned to position II the charge air coolant pump will run, to aid coolant bleed. Make sure the charge air coolant pump is primed prior to running the pump.
Start the engine and allow to run for 30 seconds, stop the engine.
- Check and top-up the coolant.
- Refer to: Engine Cover - V6 S/C 3.0L Petrol