LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2013 >> LR2 HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP70 8-Speed Automatic Transmission RWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XF/X260) >> Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP70 8-Speed Automatic Transmission RWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Transfer Case Front Output Seal >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XF and 2017 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11314271

    Using the special tool, install a new output shaft seal.

    Special Tool(s):  307-520, JLR-307-696

  2. G11314268

    Install a new circlip.

  3. G11314267

    Using a soft face hammer, install the output flange.

  4. CAUTION: Make sure that new bolts are installed.
    G11314274

    Torque Specifications: 

    Stage 1: 40 Nm 

    Stage 2: 90° 

  5. CAUTION: A new breather vent must always be installed.
    G11314275
  6. Refer to: Transfer Case Draining and Filling 
scientia non olet · About LEMON Manuals