Control Diagram
NOTE:
A
= Hardwired;D
= High speed Controller Area Network (CAN) bus.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Battery |
| 2 | Battery Junction Box (BJB) |
| 3 | Rear Junction Box (RJB) |
| 4 | EPB switch |
| 5 | EPB module |
| 6 | Left EPB actuator |
| 7 | Right EPB actuator |
| 8 | Instrument Cluster (IC) |
| 9 | Diagnostic socket |
| 10 | Wheel speed sensor (4 off) |
| 11 | Anti-lock Brake System (ABS) module |
| 12 | Engine Control Module (ECM) |
| 13 | 1st gear switch (manual transmission vehicles only) |
| 14 | Neutral sensor (manual transmission vehicles only) |
| 15 | Transmission Control Module (TCM) (Automatic Transmission vehicles only) |
| 16 | Acceleration Pedal Position (APP) sensor |
| 17 | Central Junction Box (CJB) |
| 18 | Clutch position sensor (manual transmission vehicles only) |
| 19 | Reverse gear switch (manual transmission vehicles only) |
| 20 | Stop lamp switch |