General Procedures: Check
WARNING:
Chock the wheels and make sure that all personnel are clear of the vehicle before carrying out the following procedure.
CAUTION:
LH illustration shown, RH is similar.
NOTE:
- To be carried out in the event that the vehicle has no electrical power.
- Removal steps in this procedure may contain installation details.
- Disconnect the battery ground cable.
Refer to: Specifications
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: Wheel and Tire
-
CAUTION: Discard the bolt.NOTE: Remove and discard the O-ring seal.
Torque Specification: 11 Nm