LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2013 >> LR2 HSE >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation -- LR2/L359 >> Power Brake Actuation >> Power Brake Actuation (Description And Operation) >> Description And Operation >> Stop/Start Vehicles >> Brake vacuum sensor

Brake vacuum sensor

G11589514

A brake vacuum sensor is introduced on Stop/Start vehicles to monitor vacuum reserves in the brake servo. The vacuum sensor is mounted in the vacuum pipe and hardwired to the Engine Control Module (ECM).

For additional information, refer to: Starting System - GTDi 2.0L Petrol

scientia non olet · About LEMON Manuals