LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2013 >> LR2 HSE >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation -- LR2/L359 >> Power Brake Actuation >> Brake Vacuum Pump - TD4 2.2L Diesel >> Removal And Installation >> Removal

Removal And Installation: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the cover and disconnect the battery ground cable.

    Refer to: Specifications

  2. Remove the engine cover.

    Refer to: Engine Cover - TD4 2.2L Diesel

  3. G11589534

    Torque Specification: 9 Nm 

  4. G11589535
  5. CAUTION: Make sure that all openings are sealed.
    G11589536
  6. CAUTION: The seals are to be reused unless damaged.
    G11589537

    Torque Specification: 9 Nm 

  7. NOTE: Do not disassemble further if the component is removed for access only.
    G11589538

    Torque Specification: 9 Nm 

scientia non olet · About LEMON Manuals