Removal And Installation: Installation

CAUTION: Tighten the bolts in the sequence shown.

NOTE: Install new gasket.

Fig 1: Turbocharger Flange Bolts Tightening Sequence
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Torque Specification: 50 Nm
CAUTION:
- Make sure that a new Turbocharger drain pipe is installed.
- Make sure that the gasket is correctly located.
NOTE: Install new gaskets.

Install a new Turbocharger oil drain pipe.

Torque Specification: 10 Nm
CAUTION: Make sure that new sealing washers are installed.

To install, reverse the removal procedure.