LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 378 (Fuel Tank & Lines - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XF/X250) >> Fuel Tank And Lines - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Removal And Installation >> Fuel Pump And Sensor Unit (G1086686) >> Installation

Fuel Pump And Sensor Unit (G1086686): Installation

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 Jaguar XFR-S, 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR-S, and 2014 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • Take extra care not to damage the fuel tank level sensor float and arm.
    • Make sure the fuel pump and sender unit is correctly installed in to the retaining bracket in the fuel tank.
    NOTE: Make sure the locating tang is installed in the correct position.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals