LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2011 >> LR2 HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 519 (Fuel Tank & Lines - GTDI 2.0L Petrol -- LR2/L359) >> Fuel Tank And Lines - GTDI 2.0L Petrol >> Fuel Level Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Avoid flames, sparks or lighted substances.
CAUTION:
  • Be prepared to collect escaping fuel.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Disconnect the battery ground cable.

    Refer to: Specifications

  3. Refer to: Fuel Pump and Sensor Unit 
  4. G11591796
  5. NOTE: Do not disassemble further if the component is removed for access only.
    G11591797