Remote Fuel Pick-Up and Level Sensor Assembly

WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.

The remote fuel pick-up is located in the LH side of the fuel tank. The pick-up arm assembly is attached to the tank internal bracket which holds the pick-up at the bottom of the tank.

The fuel pump system incorporates two jet pumps. One jet pump is integrated into the fuel pump and draws fuel from the RH side of the tank into the swirl pot. The other jet pump is located on the fuel delivery module on the RH side of the tank. A pick-up pipe located in the LH side of the tank allows fuel to be drawn over from the LH side of the tank, delivering fuel into the swirl pot. The jet pumps operate on a venturi effect created by the fuel passing through the jet pump.

The fuel level sensor for the LH side of the tank is attached to the pickup arm assembly, which is secured to an internal bracket. The fuel pickup and level sensor are serviceable components and access is by removal of the top flange on the RH side of the fuel tank.