Description And Operation: Operation

WARNING: This page is about a different car, the 2018 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

The turbocharger is an exhaust-driven centrifugal air compressor which increases power output by supplying compressed air to the engine. The turbine wheel of the turbocharger extracts energy from engine exhaust gases to drive the compressor wheel. The compressor wheel draws in ambient air through the air intake system which is compressed and delivered through a charge air cooler to the throttle body.

By turbocharging the engine, the pressure and density of the air entering the cylinders is increased, and therefore so is the amount of oxygen.

By turbocharging the engine effects the following:

Enables a greater quantity of fuel to be injected.
Increasing the engine's power output.
Improving fuel consumption.
Ability to maintain power at higher altitudes.

The turbocharger is interconnected by the charge air hoses of the intake air distribution and filtering system.

For additional information, refer to: Intake Air Distribution and Filtering

The charge air cooler is used to increase the density of air as it flows from the turbocharger compressor to the intake manifold.

Compression of the charge air by the turbocharger raises the temperature of the air. This generation of heat decreases the charge air density, and consequently less oxygen is able to enter the cylinders, reducing the engines power. To overcome this, the compressed air is routed through the charge air cooler before it enters the engine. The charge air cooler reduces the compressed air temperature by transferring the heat to atmosphere.

The operation of the turbocharger system is controlled by the Powertrain Control Module (PCM). The turbine bypass control actuator controls the pressure of exhaust side of the turbocharger. The compressor recirculation valve prevents the compressor surge during tip out events.