LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2009 >> LR2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 405 (Engine Cooling - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XF/X250) >> Engine Cooling - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Removal And Installation >> Coolant Expansion Tank (G1085721) >> Removal

Coolant Expansion Tank (G1085721): Removal

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 Jaguar XFR-S, 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR-S, and 2014 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Battery Disconnect and Connect (Battery, Mounting and Cables, General Procedures).
  2. Using a syringe, remove the cooling fluid from the expansion tank.
  3. CAUTION: Take extra care not to damage the component.
    G11418589

    Torque Specification: 7 Nm 

  4. G11418590
  5. CAUTION: Note the fitted position of the component prior to removal.
    NOTE:
    • Do not disassemble further if the component is removed for access only.
    • Make sure that the component is installed to the position noted on removal.
    G11418591
scientia non olet · About LEMON Manuals