LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2009 >> LR2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP70 8-Speed Automatic Transmission RWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XF/X260) >> Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP70 8-Speed Automatic Transmission RWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Transfer Case Control Module >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XF and 2017 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    • Connect Jaguar approved diagnostic equipment.
    • Clear any Diagnostic Trouble Codes (DTCs).
    • Start the diagnostic service function "transfer case-transfer case replacement".
    • Using the diagnostic tool, calibrate the component.
    • Clear any Diagnostic Trouble Codes (DTCs) after calibration and check for correct operation.
scientia non olet · About LEMON Manuals