Battery Disconnect/Connect
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The vehicle status and battery condition must be established before attempting battery disconnect/connect. Reference must be then made to the following table to establish the relevant procedure to be followed.
NOTE:
- Vehicles fitted with a fuel fired booster heater will require a minute wait before telestart function will operate. Cycle the ignition off->on->off. Wait 5 minutes to allow fuel fired booster heater to store vehicle configuration parameters.
| Vehicle status | Battery charged | Battery discharged |
|---|---|---|
| Procedure | Procedure | |
| Engine running | 1 | |
| Vehicle powered down, locked and alarmed | 2 | 3 |
| Vehicle unlocked | 4 | 5 |