LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2008 >> LR2 SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 370 (Exhaust System - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XF/X250) >> Exhaust System - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Removal And Installation >> Exhaust Sound Enhancement Valve (G1086742) >> Removal

Exhaust Sound Enhancement Valve (G1086742): Removal

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 Jaguar XFR-S, 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR-S, and 2014 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe due care when working near a hot exhaust system.
NOTE:
  • The exhaust sound enhancement valve is an integeral part of the muffler and cannot be serviced separately.
  • Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. CAUTION: Make sure that these components are installed to the noted removal position.
G11423874

Torque Specifications: 

M8 25 Nm 

M10 55 Nm