Rear Section - 5.0L Supercharger - From 2010MY

The 2 pipes from the front section each connect into 2 short pipes on the center resonator box and are secured with clamps. Two pipes from the center resonator box each connect into a second resonator silencer. The resonator silencer comprises perforated tubes separated by 2 baffle plates. Exhaust gasses exit the resonator silencer via 2 outlet pipes. Each pipe has a welded hanger bracket which allows the rear section to be supported on mounting rubbers. A further bracket is welded to each pipe which braces the 2 pipes together.

The 2 rear silencers each have a welded inlet pipe which mate with the outlet pipes from the cylindrical resonator silencers and are each secured with a clamp. The inlet pipes each have a welded hanger bracket which support each rear silencer at the rear of the vehicle on mounting rubbers. The fabricated rear silencers have a perforated inlet tube which is supported on 2 baffle plates. Each rear silencer has a welded hanger bar which supports the rear silencer on mounting rubbers. The outlet pipe is fitted with a welded twin outlet which is covered with 2 polished stainless steel finishers which are part welded to the silencer.