LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2008 >> LR2 SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 370 (Exhaust System - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XF/X250) >> Exhaust System - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Description And Operation >> Exhaust System - Overview (G1088859) >> Overview >> 4.2L V8 NATURALLY ASPIRATED - FROM 2010MY (NAS Only)

4.2L V8 NATURALLY ASPIRATED - FROM 2010MY (NAS Only)

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 Jaguar XFR-S, 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR-S, and 2014 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.

The 4.2L V8 exhaust system is fabricated from stainless steel and is supplied as 5 separate assemblies. The 4.2L V8 naturally aspirated system is similar in design to the system used on the 3.0L V6 gasoline engine variant.

The front section comprises 2 separate assemblies (LH and RH) incorporating a catalytic converter for each bank of cylinders. The rear section also comprises 3 separate sections. Each section incorporates a center resonator silencer and a rear silencer.

The system is attached to the underside of the body with mounting rubbers which are located on steel hanger bars that are welded to the system. The mounting rubbers locate on corresponding hangers which are welded or bolted to the underside of the vehicle body.

scientia non olet · About LEMON Manuals