LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2008 >> LR2 HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 510 (Parking Brake & Actuation -- LR2/L359) >> Parking Brake And Actuation >> Parking Brake And Actuation (Diagnosis And Testing) >> Diagnosis And Testing >> Inspection And Verification >> Visual Inspection

Visual Inspection

WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
MECHANICAL ELECTRICAL
  • Electric park brake actuator(s)
  • Brake caliper
  • Brake discs/pads
  • Electric park brake control module mounting
  • Fuse(s)
  • Wiring harness/electrical connectors
  • Check for bent/corroded electric park brake control module connector pins
  • Electric park brake switch
  • Electric park brake control module
  • CAN circuit
  1. 3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
  2. 4. If the cause is not visually evident, check the anti-lock brake system control module and steering angle sensor module for DTCs and refer to the relevant DTC Index.