LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2008 >> LR2 HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 417 (Engine Ignition - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XF/X250) >> Engine Ignition - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Removal And Installation >> Ignition Coil-On-Plug (G1085794) >> Removal

Ignition Coil-On-Plug (G1085794): Removal

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 Jaguar XFR-S, 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR-S, and 2014 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. Refer to: Battery Disconnect and Connect (Battery, Mounting and Cables, General Procedures).
  2. Refer to: Engine Cover - V8 S/C 5.0L Petrol (Interior Trim and Ornamentation, Removal and Installation).
  3. Refer to: Secondary Bulkhead Right Panel - TDV6 3.0L Diesel/V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol (Front End Body Panels, Removal and Installation).
  4. CAUTION:
    • Be prepared to collect escaping coolant.
    • Make sure that all openings are sealed. Use new blanking caps.
    G11416494
  5. G11416495
  6. G11416496

    Torque Specification: 7 Nm