LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2008 >> LR2 HSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 361 (Fuel Charging & Controls - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XF/X250) >> Fuel Charging And Controls - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Description And Operation >> Fuel Charging And Controls - System Operation And Component Description (G1088358) >> System Operation >> General

System Operation: General

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 Jaguar XFR-S, 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR-S, and 2014 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.

The ECM (engine control module) controls the output from the HP fuel pumps to deliver the required volume of fuel at pressures up to 150 bar (2175 lbf/in 2 ).

The ECM uses the signal from the FRP (fuel rail pressure) sensor to calculate the time the fuel injectors need to be energized to deliver the correct mass of fuel to the combustion chambers.

scientia non olet · About LEMON Manuals