Seat Belt

The seat belt warning lamp is controlled by the SRS DCU, the LCM and instrument pack software.

On vehicles in markets where seat belt buckle switches are not required, the seat belt warning lamp is illuminated in a red color briefly with the ignition in position II.

On vehicles in markets where seat buckle switches are required, the seat belt warning lamp is illuminated in a red color with the ignition in position II. The lamp is only extinguished when the seat belt buckle switch contacts are broken by fastening of the seat belt. The illumination of the lamp is accompanied by 'FASTEN SEAT BELTS' displayed in the message center and an intermittent chime from the sounder.