Brake Pad Wear
- The front brake pads are fitted with a wear indicator system. The LH and RH pads are wired in series to the instrument pack which continuously monitors the circuit. When one or both pads wear to their allowed limit, the indicator circuit is broken and detected by the instrument pack software. The instrument pack illuminates the general brake warning lamp in a red color. The instrument pack simultaneously, transmits a message to the LCM which displays 'CHECK BRAKE PADS' in the message center. When the brake pads are replaced, the instrument pack withdraws the message and the warning lamp illumination when the ignition is in position II, the engine is not running and the vehicle is not moving for 30 seconds.