LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2002 >> Range Rover >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instruments - Description & Operation >> Description >> Service Interval Indicator >> SII Reset Procedure >> SII Reset Procedure (Japan and NAS)

SII Reset Procedure (Japan and NAS)

  1. Ensure that the ignition is switched off.
  2. Press and hold the LH instrument pack button.
  3. With the button held, switch the ignition on to position I (AUX).
  4. Continue to hold the LH instrument pack button for a further 5 seconds, until the "SIA RESET" appears.
  5. The message center will display the distance to service status as "RESET SIA: 3600km/mls" and "INSPECTION".
  6. Press and hold the LH button for another 5 seconds. "RESET" flashes in the message center.
    1. If the LH button is not pressed again before the fifth flash of "RESET", the reset will not be performed. The message center will display the existing distance to service data for 5 seconds, followed by "END SIA" for 2 seconds, and then switch off.
    2. If the LH button is pressed before the fifth flash of "RESET", the service distance will be reset. The message center will display the new service distance "END SIA: 25000 km/miles" for 5 seconds, followed by "END SIA" for 2 seconds, and then switch off.
  7. Switch the ignition off.
scientia non olet · About LEMON Manuals