Test Function No. 13 - Activation of the Chime Signals
- This function is locked and needs to be unlocked via the procedure in Function Test No. 19.This function provides for testing of the instrument pack sounder in the fascia closing panel, below the steering column. When the function is selected, 'CHIME?' appears in the message center. Pressing the trip reset button once activates the three available chime signals as follows:
- Chime T1 - activated for 100 milliseconds with a 2.5 second pause. Used for the MEMO signal.
- Chime T2 - activated for 100 milliseconds with a 2.5 second pause. Used for the Ambient temperature warning.
- Chime T1 and T2 - activated for 100 milliseconds with a 2.5 second pause. Used for LIMIT/CODE warning.
- Chime T3 - Activated for 100 milliseconds with a 2.5 second pause. Used to indicate check control messages.