LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1997 >> Defender 90 (LD) V8-4.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Overhaul >> R380 >> Gearbox Dismantle >> Checking Baulk Ring Clearances

Checking Baulk Ring Clearances



Checking Baulk Ring Clearances







Check clearance of all baulk rings and gears by pressing the baulk rings against the gear and measuring the gap.
Minimum clearance - 0.5 mm (0.020 in).
scientia non olet · About LEMON Manuals