LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1997 >> Defender 90 (LD) V8-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair

Drive Belt Tensioner: Service and Repair

Drive Belt Tensioner

REMOVE
1. Remove drive belt.





2. Loosen tensioner centre bolt.
3. Remove bolt and tensioner.

INSTALLATION
1. Install the tensioner and bolt, tighten bolt to 50 Nm (39 ft. lbs.).
2. Install the drive belt.

scientia non olet · About LEMON Manuals