LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1995 >> Discovery Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> System Tests >> Test A: Any Instrument Does Not Operate

Test A: Any Instrument Does Not Operate

  1. Turn ignition on. Disconnect instrument cluster harness connector (C207). Connect voltmeter positive lead to terminal No. 7 (Light Green wire). See WIRING DIAGRAMS  . Connect voltmeter negative lead to ground, and measure voltage. If battery voltage is present, go to next step. If battery voltage is not present, inspect F14 fuse (10-amp) or repair Light Green wire.
  2. Turn ignition off. Disconnect instrument cluster harness connector (C255). Connect ohmmeter positive lead to terminal No. 1 (Black wire). See WIRING DIAGRAMS  . Connect ohmmeter negative lead to ground, and measure resistance. If resistance is less than one ohm, replace instrument cluster. If resistance is not as specified, repair Black wire,
scientia non olet · About LEMON Manuals