Depressurizing EAS System
WARNING:
When pressure is released from EAS system, vehicle body will immediately lower onto bumper stops. Before releasing pressure, ensure there is nothing between vehicle body and bumper stops.
Connect Lucas RTC 6834 Handheld Tester and Air Suspension Smart Card and follow EAS system depressurizing instructions. Ensure system is completely depressurized. Check that all air springs are deflated, and that vehicle is resting evenly on all 4 bumper stops. If any air spring remains inflated, it will be necessary to disconnect pressurized air line at air spring. Wrap a clean cloth around air line before disconnecting it. Disable system using switch under right seat.