LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1990 >> Range Rover County >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Air Suspension - 3.9L & 4.2L >> Removal & Installation >> Pressure Relief Valve >> Removal

Pressure Relief Valve: Removal

WARNING: Air suspension is pressurized up to 10 bar. Dirt or grease must not enter the system. Wear hand, ear and eye safety standard protection when servicing system.
  1. Remove valve block. See VALVE BLOCK  .
  2. Clean around pressure relief valve with a stiff brush and soapy water.
  3. Remove pressure relief valve. See Fig 1 .
Fig 1: Removing & Installing Pressure Relief Valve
G00089016Courtesy of LAND ROVER NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals