LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1990 >> Range Rover County >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Air Suspension - 3.9L & 4.2L >> Removal & Installation >> Pressure Relief Valve >> Installation

Pressure Relief Valve: Installation

  1. Coat threads of pressure relief valve with Loctite 572.
  2. Install valve and tighten to 12 N.m (106 INCH lbs.). See Figure .
  3. Reverse removal procedures.
scientia non olet · About LEMON Manuals